Connect-Tek USB-8 Manual de usuario descargar pdf (Pagina 21)

Installation

Setting the GPIB Address

The default GPIB address of the adapter is 1. This address is used with instruments that are no t manufactured by Tektronix or with

Tektronix instruments that are n ot designed to support the adapter.

If you connect the Tek-USB-488 GPIB to USB Adapter to a Tektronix USBTMC-USB488 compliant instrument designed to support

the adapter, such as a DPO4000 Series instrument, you can set the address to a value from 1 through 30 using the menu

system of the instrument.

To change the GPIB address from an instrument designed to support the adapter, do th e following procedure:

1. Locate the GPIB control menu on the

instrument being attached. The example to the

right is from a DPO4000 Series instrumen t.

System

I/O

USB

Enabled

Ethernet

Network

Settings

GPIB

GPIB Con-

ﬁguration

2. Use the appropriate control to select the

address that you want. The instrument

automatically disables and enables the USB

port so that the new address is recognized.

Talk/Listen

Address

TEK-USB-488 G PIB to USB Adapter User Manual 9

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 110 111

Sin comentarios

Connect-Tek USB-8 Manual de usuario Pagina 21