Connect-Tek Transa PRO 17 El manual del propietario descargar pdf (Pagina 13)

System Status Beeps

The panel speaker and interior sirens provide system feedback by sounding status beeps.

Table 3 describes the status beeps you may hear from your panel.

Table 3

. Understanding Status Beeps

Type Pattern Indicates

Arm-

ing

Level

1 beep System disarmed to level 1.

2 beeps

System armed to level 2, or armed to level 2 and exit delay

has expired.

3 beeps

System armed to level 3, or armed to level 3 and exit delay

has expired.

Entry

Delay

2-beep continuous

sequence *

System armed to level 2 and entry delay is in progress.

3-beep continuous

sequence *

System armed to level 3 and entry delay is in progress.

Chime

2-beep (1 long, 1

short)

System disarmed to level 1 with chime feature on while an

exterior sensor opened.

Protest

2-beep continuous

sequence (1 long,

1 short)

1. System disarmed after an alarm from a wireless touchpad,

including Keychain Touchpad.

2. Attempt to arm to level 2 while the READY light is OFF,

indicating an exterior sensor is open.

3. Attempt to arm to level 3 while the READY light is OFF

(indicating an exterior sensor is open), or blinking (indicat-

ing an interior sensor is open).

Trouble

6-beep sequence,

once every minute

1. System has AC power failure.

2. System has low sensor battery.

3. System has failure to communicate.

4. System has sensor failure.

5. System has low battery.

6. System’s memory is clear.

Press

STATUS

for a voice message of the problem (see Section

6, "Troubleshooting Your System"), or contact your security

consultant.

* Entry delay beeps sound at a more rapid pace if an alarm has occurred. Exit the premises immediately

and call for emergency help from a neighbor’s phone.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 60 61

Comentarios a estos manuales

Sin comentarios

Connect-Tek Transa PRO 17 El manual del propietario Pagina 13

Comentarios a estos manuales