Connect-Tek Transa PRO 17 El manual del propietario descargar pdf (Pagina 33)

Activate an alarm

Turn system-controlled lights on and off. (See also "Controlling Lights (LIGHTS)" on

page 30.)

Bypass sensors indirectly. (See also “Bypassing Normally Armed Sensors

(BYPASS)” on page 28.)

■

To arm the system from a Keychain Touchpad:

1. Close all perimeter doors and windows.

2. Check to see that the panel’s READY light is on or blinking.

or– If the READY light is not on or blinking, press the

STATUS

button at the panel or a

touchpad to learn if there are any system problems.

The system’s voice message should provide you with the number of any sensors that

are open. After double-checking those sensors, if the READY light is still not on or

blinking, refer to "Bypassing Normally Armed Sensors (BYPASS)" on page 28. You

also should contact your security consultant to resolve the problem.

3. Press the Arm button until the light blinks.

The panel’s STAY or AWAY light turns on, and the panel and interior sirens sound

two or three beeps at the beginning of the exit delay.

NOTE: Depending on programming, a Keychain Touchpad may arm

your system to the next higher arming level or directly to level 3 NO

DELAY.

4. Exit the premises within the delay time, if you are leaving.

When the delay time expires, the panel and interior sirens sound two or three more

beeps. If you are still on the premises and want to leave, disarm and rearm the system

to prevent an accidental alarm.

■

To arm the system with no alarm delay from a Keychain

Touchpad:

1. Close all perimeter doors and windows.

2. Check to see that the READY light is on or blinking at the Panel.

3. Press the Arm button, then press the Star button and hold until the light blinks.

The Panel’s STAY or AWAY light turns on, and the Panel and interior sirens sound

arming level beeps. The NO DELAY light turns on, and the Panel and interior sirens

sound arming level beeps again.

NOTE: Disarm the system before opening a perimeter door or window, or

an accidental alarm may occur.

NOTE: Depending on programming, a Keychain Touchpad may arm

your system to the next higher arming level, or directly to level 3

NO DELAY.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 60 61

Sin comentarios

Connect-Tek Transa PRO 17 El manual del propietario Pagina 33