Connect-Tek Transa PRO 17 El manual del propietario descargar pdf (Pagina 25)

Silent Duress Alarm

If you are in a life-threatening situation (for example, if you enter the premises

and find an intruder inside), you can enter the duress code instead of an access

code while arming or disarming the system. The duress code causes the panel to

send a silent duress alarm to the monitoring service. This notifies the monitoring

service of a potentially life-threatening situation, but no alarms sound at the pre-

mises.

NOTE: If you do not have a monitoring service for your system,

you cannot use the silent duress alarm feature.

The first two digits of your duress code are the same as the first two digits of your

primary access code. The last two digits can only be changed by your security

consultant or monitoring service.

■

To activate a silent duress alarm:

Enter

DURESS CODE + [1, 2, OR 3].

The panel and interior sirens sound the appropriate number of arming level beeps

for the level you selected, and the panel announces,

Alarm system is [OFF or ON

level #]

. The system immediately reports the duress alarm to the monitoring ser-

vice.

NOTE: Silent duress alarms cannot be canceled.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 60 61

Sin comentarios

Connect-Tek Transa PRO 17 El manual del propietario Pagina 25