Connect-Tek Transa PRO 17 El manual del propietario descargar pdf (Pagina 27)

SECTION 4–

ADVANCED SYSTEM OPERATIONS

This section describes how to perform the more advanced system operations, including: arming

with no alarm delay, bypassing normally armed sensors, using the chime feature, controlling lights,

and using and programming the Magic Key.

Arming with No Alarm Delay (NO

DELAY)

The No Delay feature is used when you want an alarm to sound immediately when a sen-

sor is activated, if the system is armed to level 2 or 3 and if the sensor is normally delayed

in that level. No Delay makes all normally delayed sensors instant for that arming period.

You might choose to use No Delay in a home when all family members are in for the night

and you are ready to arm the system to level 2. If an intruder opens a delay door, an instant

alarm occurs. You can also use No Delay if you are outside the premises, have a touchpad,

and are leaving.

■

To arm the system with no alarm delay time:

1. Close all perimeter doors and windows.

2. Check to see that the READY light is on or blinking at the panel.

3. Enter

ACCESS CODE + [2 OR 3] + 4.

or– Press

COMMAND + [2 OR 3] + 4

, if your system is set up for this capability.

The red STAY or AWAY light on the panel turns on, the panel and interior sirens

sound arming level beeps, and the panel announces,

Alarm system is ON [level two

or three]. The NO DELAY light on the panel turns on, and the panel announces, No

delay.

NOTE: Disarm the system before opening a perimeter door or window, or

an accidental alarm may occur.

■ To arm the system with no alarm delay from a Keychain

Touchpad:

1. Close all perimeter doors and windows.

2. Check to see that the READY light is on or blinking at the Panel.

NO DELAY

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 60 61

Sin comentarios

Connect-Tek Transa PRO 17 El manual del propietario Pagina 27