Connect-Tek Transa PRO 17 El manual del propietario descargar pdf (Pagina 30)

Controlling Lights (LIGHTS)

X-10 Lamp Modules allow your system to turn lights on and off. X-10 Lamp Modules can

control any incandescent lights that plug into an outlet.

Panel Light Control

The Panel instructs the X-10 Lamp Module to control lights as follows:

■ During a fire alarm, lights turn on and remain on until the security level

changes or after 12 hours with no system status change.

■ During an intrusion alarm, lights blink until the siren time-out ends, then

they remain on steady for up to 12 hours with no system status change.

■ During entry and exit delay time, lights turn on and remain on for 5 minutes.

NOTE: If the system is disarmed during any of the above scenar-

ios, lights controlled by X-10 Lamp Modules turn on steady

and remain on for an additional 5 minutes.

User Light Control

Lights controlled by an X-10 Lamp Module can be turned on or off with the sys-

tem in any security level.

■

To turn controlled lights on or off from the Panel or a

Handheld Touchpad:

Enter

ACCESS CODE

, with the Panel in any security level.

or– Enter

COMMAND

from the Panel or a touchpad.

The Panel announces,

On or Off.

■

To turn controlled lights on or off from a Keychain Touch-

pad:

Press and hold the Light button until the light blinks.

The Panel announces,

On or Off. Controlled lights turn on or off, depending

on the current setting.

LIGHTS

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 60 61

Sin comentarios

Connect-Tek Transa PRO 17 El manual del propietario Pagina 30